Expert Answers about Truck Tool Box
- Replacement Striker Pin and Bracket for UWS Truck Tool Box
- The Replacement Striker Bracket for UWS Truck Tool Boxes - Qty 1 # UWS-SBRACKET will use the Replacement Nail Head Striker Pin for UWS Boxes with Paddle Handles - 1/4" Diameter # C003-NHPIN.
view full answer... - Replacement CH502 Lock Set for Delta Truck Tool Box
- While there's a very good chance that the UWS Replacement Lock Cylinder - CH502 # UWSLOCKCH502 referenced in your question is what you need for your Delta Truck Box, the two manufacturers aren't related to each other. We do not currently carry Delta products so I can't confirm that the UWS lock and key set will work on your box, but since the numbers are exactly the same it's likely that the two companies simply obtain their latches from the same source. If this lock set looks like what...
view full answer... - Replacement 501CH Key for Truck Tool Box
- We have exactly what you need.
For a replacement 501CH key for your truck tool box, you will use part # KEYCH501. If you need both the key and lock cylinder, you can use part # UWSLOCKCH501, which comes with the lock core and 2 keys.
view full answer... - Replacement Lock and Key # CH509 for Leer Truck Cap Tool Box
- I checked with my technical contact at UWS to see if they made the truck cap tool box for Leer but I was not able to confirm that this was their OEM product. Still, it is quite likely that this part will work for you since the reference number matches exactly.
To help you confirm the fit I pulled a sample from inventory and took several measurements for you.
The video linked at right will show you this item and includes the measurements. Please note that part # UWSLOCKCH509 includes the...
view full answer... - Replacement Lid Lift Strut for Tool Box
- We do not carry your specific brand of tool box but we do offer a Replacement Lift Cylinder part # UWSLIFTCYLIND which may work for you since often tool box parts like lid-lift struts share common fits.
This strut measures 7-inches in length when fully retracted, and 11-inches long when fully extended. The strut fits on ball studs like # UWSBALLSTUD that are 9.75-mm in diameter and it has a 45-lb lift capacity.
view full answer... - What is the Length of UWS Replacement Toolbox Lift Cylinder # UWSLIFTCYLIND
- The UWS Replacement Toolbox Lift Cylinder # UWSLIFTCYLIND will fit all UWS brand tool boxes that use this type of heavy-duty gas lift. The length of this part, measured from the center of one ball socket to the other, is 10-inches just like your original part. The two ends of the cylinder have the same type of ball socket fitting, which is shown on the linked photo I prepared for you.
view full answer... - Will Replacement Key for UWS Toolboxes KEYCH507 Fit Gem Truck Canopy with Same Lock Code
- UWS tool boxes are part of the Thule Group and their replacement tool box key # KEYCH507 should work just fine for your Gem truck canopy since up until 2012 Thule had a direct business relationship with Gem. I confirmed this with my contact at Thule.
The first time you insert the key it may have a snug fit in the lock. Sometimes a gentle tap will help get the key fully inserted.
The keys are sold singly so you may want to order a couple to have extras on hand.
view full answer... - Replacement Keys & Locks for UWS Truck Toolbox
- Key codes for UWS toolboxes usually include the letter prefix CH. Please refer to the photo that shows where to find this on the face of the lock. This photo happens to show a lock code CH510.
I tried both of the codes you gave but neither seems to return a valid result.
You may prefer to just order a whole lock with new keys. We offer several options for different types of tool boxes. For example, part # UWSLOCKCH510 is a lock with two keys that fits toolboxes with square paddles, but...
view full answer... - Compatibility of UWS Replacement Lift Cylinder # UWSLIFTCYLIND With Husky Truck Tool Box
- The UWS Replacement Lift Cylinder # UWSLIFTCYLIND is intended specifically for UWS tool boxes with heavy-duty gas lifts. It uses ball socket attachments at both ends as shown in the linked photo. I checked on the Stabilus struts and they appear to use the same type of ball socket but since dimensions were not available for me to compare to the UWS I cannot tell you for sure if the UWS part will work. Part # UWSLIFTCYLIND measures 10-inches from center of socket to center of socket.
view full answer... - Replacement Key for Lock on American Aluminum Accessories Toolbox
- We can indeed get you a replacement key. You'd order the part # KEYCH504 you referenced.
view full answer... - Replacement Lift Cylinder for an Unknown Brand of Toolbox
- The only toolbox lift cylinder we have is # UWSLIFTCYLIND so you will need to go by the dimensions and how it mounts to determine if it will fit your toolbox. The ends of this cylinder press onto 9.75mm balls inside the toolbox. The ball is # UWSBALLSTUD if you want to add a couple to the box. The cylinder measures 7 inches in length when fully retracted, and 11 inches long when fully extended.
view full answer... - Replacement Struts for Payload Plus Truck Bed Toolbox
- I may have a solution for you, but since we do not carry the Payload Plus brand of truck mounted toolboxes, we won't have anything that will mount directly to the existing mounting hardware on your box.
You can use the top bracket # UWS-TCA and bottom bracket # UWS-BCA to install new mounting points on your existing toolbox and then connect those to the # UWSLIFTCYLIND to give yourself gas powered struts for your toolbox. These struts have a compressed length of 7" and extended length...
view full answer... - Replacement Locks and Keys for Tool Boxes on Used Tow Truck with PK10, PK12, and PK9 Locks
- It sounds like you simply need some replacement toolbox lock cylinders keyed alike. The PK numbers you gave were for basic lock cylinders for toolboxes and even though we don't carry those specific locks or keys I do have options for you.
I recommend the Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles # UWSLOCKCH509 for example and simply selecting the quantity desired keyed the same. Some numbers are more prominent than others so the replacement prices may vary....
view full answer... - Recommended Underbody Storage Toolbox Measuring 30x18x18
- The RC Manufacturing Z-Series Underbody Toolbox part # UBT1818-30 which measures 30" long x 18" wide x 18" tall is deigned to be used on flatbed trucks, dump trucks, or trailers. That said, it can be made to work on other application as well but you'd need to make custom mounting brackets for this.
view full answer... - Replacement 10-Inch Gas Strut for Lid of Husky Tool Box
- We offer a replacement heavy-duty gas strut with a 10-inch dimension between its ball/socket mounts, part # UWSLIFTCYLIND from UWS which is the item you referenced. This item has a weight capacity of 45-lbs. I could not find a cross reference for the part numbers you provided (thank you) but since the dimensions match up exactly, so long as your tool box lid does not weigh more than 45-lbs (unlikely since it is aluminum) you should be fine using this item in your Husky tool box.
view full answer... - Replacement Cover For Extang Classic Platinum Cover with Toolbox on 2002 Ford Super Duty
- It sounds like you have the classic platinum cover by Extang on your 2002 F-250 with tool box which means it's part number 32720. The correct replacement tarp for your tonneau cover is # EX49VR. The replacement tarp does not come with hardware or the frame so you'll need to reuse the old hardware.
view full answer... - Replacement Tarp for Extang Trifecta Signature Soft Tonneau Cover
- I see that you asked this from an Extang soft replacement tarp page. The only Extang Cover we have that has the soft top and fits your 2011 Chevrolet Silverado with 6-1/2' bed with tool box is the Extang Trifecta Signature Soft Tonneau Cover EX46651.
If that is the cover that you are looking for the replacement tarp for then the correct replacement is the Replacement Tarp for Extang Trifecta Signature Series Soft Tonneau Cover # EX45651.
view full answer... - Replacement Key for Tractor Supply Tool Box With CH508 Lock Cylinder
- Yes, as long as CH508 is stamped on your lock cylinder you will be able to use the Replacement Key for UWS Toolboxes - CH508 # KEYCH508. Since that is what you found on your existing key I would assume your lock cylinder is marked the same way.
view full answer... - Replacement Lock Cylinder that Keys to 2012 Ford F-150 XLT Ignition Key for Spare Tire Access
- The Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Ford Side-Cut Key # BL7025636 you asked about is not the correct fit for your 2012 F150 XLT. The Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Ford Key # BL692917 is the correct fit for your truck key and will work as an access for your spare tire access on your rear bumper. You will also want the Retaining Nut for BOLT Tool Box Latch Lock Cylinder # BL4306752.
view full answer... - Replacement Key For DeeZee Toolbox
- To get replacement keys for your DeeZee toolbox you can do that with part # DZKEY. After you get to the page for the key you can type in the toolbox number of the key you need and change the quantity to the number of keys you want. It's that easy.
view full answer...
Go To Results